FAN COIL UNIT FERROLI JOLLY TOP 3V VM250

Vendor: Ferroli

Description:

FERROLI JOLLY TOP - Fan coil unit with centrifugal fan

ATTENTION: THE CONTROL IS TO BE PURCHASED SEPARATELY AS AN ACCESSORY.
JOLLY TOP 3V Series

ATTENTION: THE CONTROL IS TO BE PURCHASED SEPARATELY AS AN ACCESSORY.
The wired controller must be purchased separately from the manufacturer. Do not use other wired controllers.

New series of fan coil units with centrifugal fan and 3-speed AC motor. Featuring a maximum depth of 200 mm and, in the cased version, a particularly appealing aesthetic line, they are suitable for residential heating and air conditioning applications. Available in 5 sizes with cooling capacities from 1.65 to 6.00 kW and air flow rates from 255 to 1300 m3
/h. The standard version features a single 3-row coil, to which a supplementary 1-row coil can be added as an accessory for 4-pipe systems. Available in two versions: VM with casing and VN without casing for recessed applications. The units can be installed in both vertical and horizontal positions.

AVAILABLE VERSIONS
The range of centrifugal fan coil units includes two versions; each is available in different capacities:
VM
Cased fan coil unit with bottom intake. Consists of a sheet metal casing, a supply grille with flaps to access any controls, made of thermoplastic material, and a washable air filter housed on a metal frame located in guides at the bottom of the frame.
VN
Uncased fan coil unit for recessed applications. Without casing, with a washable air filter housed on a metal frame located in guides at the bottom of the frame.

SUPPORTING STRUCTURE
It is made of adequately thick galvanized steel. There are slots on the back for fixing the appliance. For models without a casing, a front closing panel for the fan assembly is provided.
HEAT EXCHANGE COIL
3-row coil made of copper tubing and aluminum fins, secured by mechanical expansion of the tubes. The manifolds at the top of the coil are equipped with air vents, while at the bottom they have a water drain valve*.
* The default hydraulic connection for the coil is on the LEFT. However, it is possible to rotate the coil and change it to the RIGHT (see Installation Manual).
CONDENSATE DRAIN PAN
Made of thermoplastic material to prevent corrosion, it allows the machine to be installed vertically or horizontally. In particular, in horizontal installation, its shape allows for collecting condensate drops that form on the collectors during cooling operation. The drain hole is directly integrated into the condensate collection pan, allowing for its removal during cooling operation. It is present on both sides of the machine to facilitate coil rotation.
FAN MOTOR (for I version)
The electric motor is a DC brushless type with continuous speed regulation and high efficiency, directly coupled to the fans and cushioned by elastic supports.
FAN MOTOR (for 3V version)
The electric motor, protected from overload, has three speeds with the running capacitor always engaged, directly coupled to the fans and cushioned by elastic supports.
CENTRIFUGAL FAN
The fan assembly consists of double-inlet centrifugal fans with blades developed in length to achieve high flow rates with low RPM.
AIR FILTER
Easily removable and washable with simple water.
CASING (VM only)
Partially made of steel sheet painted with epoxy powders to ensure high corrosion resistance, and partially made of anti-UV thermoplastic material to ensure resistance to ultraviolet rays.
The upper part includes grilles for air diffusion and a small door to access the control panel, both made of anti-UV thermoplastic material.
HYDRAULIC CONNECTIONS
The connections, located on the left side, are ¾” gas female type. It is possible to rotate the coil, which is supplied standard with left-side connections, moving the hydraulic connections to the right side.

You can contact us by phone at: +39 081 576 60 33 or +39 331 471 43 86

All shipments generally take place within 24/48 hours of order confirmation. In the case of payments by bank transfer, the shipment will be entrusted to the courier within 24/48 hours of receipt of payment.

Returns are accepted within 14 days from the date of receipt of the order. The return policy is applicable only to end consumers (i.e., a natural person who purchases goods for purposes not related to their professional activity, or who does not make the purchase by indicating a VAT number reference in the order form to Worldclima).

More information on returns here.