FERROLI OMNIA S HYBRID 3.2 C 08 HYBRID HEAT PUMP

Vendor: Ferroli

Description:

Sistema ibrido Ferroli Pompa di calore aria-acqua splittata R32 Omnia S Hybrid 3.2 C 08
Descrizione
OMNIA S HYBRID C 3.2 hybrid heat pumps integrate the technology of the eco-friendly R32 heat pump and the condensing boiler with instantaneous domestic hot water production into a single compact product.

The eco-friendly R32 gas combines high efficiency with reduced environmental impact. Thanks to its GWP of 675, approximately one third of the GWP of R410a, it helps reduce equivalent CO2 emissions, the main causes of global warming.

Ferroli Hybrid systems represent the ideal solution for replacing old generators, even on high-temperature systems with radiators, thanks to the integration of the boiler.

Their compact dimensions, similar to those of a wall-mounted boiler, facilitate replacement without significant loss of space or extensive renovation work.

The internal electronics, by activating the boiler or the heat pump as climatic conditions change, optimize system performance by always operating in the most economical and efficient modes possible, with great advantages for the user.

The boiler will be free to produce instantaneous domestic hot water even while the heat pump is operating in heating or cooling mode, maximizing comfort levels. Furthermore, in the unlikely event of a heat pump breakdown, the boiler will be able to function as a backup independently, ensuring heating and domestic hot water.

The system consists of a Full Inverter DC outdoor unit, available in 4 power sizes, associated with a hybrid and condensing indoor unit with an integrated hydronic module, complete with a DC Inverter pump for managing the refrigeration circuit. The system is extremely versatile, capable of operating in harsh climatic conditions down to -20°C outdoors, and avoids freezing risks thanks to the split refrigeration circuit.

Flue gas discharge through the wall in cases provided for by Legislative Decree 4 July 2014, no. 102.

Warranty extension option: "Senza Pensieri" 5 years

Outdoor Unit Features

Approved for outdoor operation in a completely open space
Powered by eco-friendly R32 gas with low environmental impact
Reduced starting current and noise thanks to Full Inverter technology
Compressor with twin rotary DC INVERTER motor on anti-vibration mounts and wrapped in a double layer of sound-absorbing material to minimize vibrations and noise
Axial fans with brushless DC motor complete with protective grilles
Outdoor air temperature sensor already installed on the unit.
Indoor Unit Features

Robust and suitable for replacements even in particularly critical systems
Combustion module with 1:10 modulation and a thick stainless steel heat exchanger with enlarged passages, capable of maintaining high efficiency even on old systems with oxidation and dirt
Supplied as standard with angled supply and return taps (with inspectable filter)
M.G.R: Methane, LPG, Propane-air Ready; with a simple configuration of the indoor unit, it can operate on methane, LPG, and propane-air without the need for additional kits
MC2: Multi Combustion Control, a combustion system with patented gas-adaptive technology for better adaptability to changes in gas network conditions (e.g., fluctuations or reduced pressures)
F.P.S: Flue Gas Protection System. The standard flue gas clapet valve allows for easy connection to collective pressurized flue systems
Particularly suitable for operation in flues requiring "heavy" lining thanks to its approval for operation with 50mm diameter flue gas outlets
Installation location: also for outdoor use in a partially protected area down to -5°C as standard.
The control system

The interface features Capsense technology with a 2.8” graphic display, allowing the user to interact with the product simply and practically. The on-board interface seamlessly communicates with the new Connect CRP smart systems, which can manage up to 8 thermostats (7 of which are Connect CRP Zone) divided into 2 zones, one direct and one mixed.
MODBUS PROTOCOL for intelligent management via an external BMS (if present)
HEATING AND COOLING with Ferroli's Full Inverter modulation which allows setting climatic curves to improve consumption and user comfort.
SMART GRID INPUT FROM PHOTOVOLTAIC AND GRID Smart Grid contacts for optimizing consumption and costs on the bill. For details, please refer to the manuals
REMOTE CONTROL VIA APP. Optional with Connect CRP, available for iOS and Android
SILENT PDC MODE. Reduces the maximum compressor frequency and fan speed, significantly reducing noise.
ON/OFF and SUMMER/WINTER from external contacts. The unit can be activated and deactivated via an external contact, also receiving summer/winter switching signals (e.g., from the zone thermostat). Operation will follow the controller settings
ECO. Dedicated setpoint for "Eco" operation. Can be set with a daily time slot
WEEKLY TIME PROGRAMMING. The Connect CRP (optional) allows differentiated time programming for each day of the week, defining the mode (COOL/HEAT/DHW) and operating setpoints for each time slot.

You can contact us by phone at: +39 081 576 60 33 or +39 331 471 43 86

All shipments generally take place within 24/48 hours of order confirmation. In the case of payments by bank transfer, the shipment will be entrusted to the courier within 24/48 hours of receipt of payment.

Returns are accepted within 14 days from the date of receipt of the order. The return policy is applicable only to end consumers (i.e., a natural person who purchases goods for purposes not related to their professional activity, or who does not make the purchase by indicating a VAT number reference in the order form to Worldclima).

More information on returns here.